Packing for CO₂ Capture

Solvent-based CO₂ capture (amine or carbonate) needs absorbers with very high mass-transfer efficiency and low pressure drop, because the energy penalty is the dominant cost. The packing must resist the corrosive solvent, handle large gas flows, and support uniform distribution to hit capture rate targets.

The Operating Environment

Amine or carbonate solvent, wet CO₂-rich gas, corrosion, large volumetric flows, energy-sensitive operation.

Packing Selection Logic

Corrugated sheet structured packing in SS316L or duplex is the standard: high efficiency, low pressure drop, good fouling tolerance. Wire mesh is used for maximum efficiency where gas is clean. 250–350 m²/m³ balances capture efficiency against column size.

Recommended Products

ProductWhy It Fits
Corrugated Sheet Metal Packing (SS316L)The industry standard for CO₂ absorbers: efficient, low pressure drop, corrosion-resistant.
Wire Mesh Structured PackingMaximum efficiency for high capture-rate targets with clean gas.

Common Failure Modes & How to Avoid Them

  • Corrosion of packing in rich-solvent service.
  • Underestimating pressure drop, raising regeneration energy.
  • Poor distribution limiting capture efficiency.
  • Foaming in amine systems causing carryover.

Frequently Asked Questions

What packing is used for CO₂ capture?

Corrugated sheet structured packing in SS316L or duplex is the standard, with wire mesh for the highest efficiency.

Why is pressure drop so important in CO₂ capture?

The energy penalty dominates cost, and pressure drop directly raises it. Structured packing minimises this.

Which material resists the solvent?

SS316L or duplex stainless. Confirm with your solvent chemistry.

What surface area should I choose?

250–350 m²/m³ typically. We size it against gas rate and capture target.

Can structured packing handle large gas flows?

Yes, structured packing is preferred for high-capacity CO₂ absorbers precisely because of its high capacity per unit volume.

Related Packing & Internals

Corrugated Sheet Metal Packing

Corrugated sheet metal structured packing equivalent to Mellapak. High capacity, low pressure drop for absorpt…

Wire Mesh Structured Packing

Wire mesh structured packing for high-efficiency distillation and absorption. Low HETP, low pressure drop. Fac…

Get a recommendation for Packing for CO₂ Capture

Tell us your flow rate, medium and operating conditions — we recommend the right packing and internals, and quote factory-direct.

Request a Quote WhatsApp